View Single Post
  #36  
Old 11-01-2019, 04:01 AM
jacky jacky ثeu
ZEOhead
 
Join Date: May 2018
Location: Asia
Posts: 2,268
Default

Basically, the ZeoVit material can be soaked for several days using Ro/di water and replaced with water several times. If you don't do this, basically no problem, use Ro/di water to rinse the material slightly.

Yes, if you prefer, you can also try to drop Zeo Start near the reactor inlet.

"Every time after replacing ZeoVit material, Zeo Bac x10 days. (1 drop / 25 US gallons)

ZeoVit material retained in the first 4 weeks, the first replacement of the old ZeoVit material 90%, the new 10% (should be I am not sure), ZeoBac 10 days, 2 weeks later, if the coral is healthy, the reactor switches to continuous flow

Low malnutrition water quality, potassium to 380 mg
Reply With Quote